International Journal
(First Author, Corresponding Author*)

29. Jun-Young Oh and Wonkyun Lee*, "Adaptive feed rate optimization and tool wear estimation for milling," submitted.

28. Beomsik Sim and Wonkyun Lee*, "Adaptive Feedforward Controller for High-frequency Control of a Pneumatic Cylinder," submitted.

27. Jun-Young Oh and Wonkyun Lee*, "Monitoring and Optimizing Machining Processes Using Cutting Force Data: A Review," submitted.

26. Odong Kwon, Jae-Eun Kim, KyungHoon Lee, and Wonkyun Lee*, "Tool Wear Prediction using Machine Learning-based Bolt type Piezo Sensor," submitted.

25. Woo-Jin Lee, Jun-Young Oh, Eunseok Nam, and Wonkyun Lee*, "Model based tool wear monitoring and feed rate optimization in turning," International Journal of Precision Engineering and Manufacturing, 202603.

24. Jong Gyun Kang, Hoo Cheon Lee, Seong Hyeon Park, Minwoo Jeon, Joong Kyu Ham, Byeongjoon Jeong, Hwan Ho Maeng, Jin Yong Heo, Hye Ri Jang, Young Heon Kim, Geon-Hee Kim* and Wonkyun Lee*, "Investigation of Optimal Heat Treatment Conditions for Enhancing the Magnetorheological Finishing Processability of Electroless Nickel Plating Layers," International Journal of Precision Engineering and Manufacturing, 202602.

23. Woo-Jong Yeo, Hwan-Jin Choi, Minwoo Jeon, I Jong Kim, Mincheol Kim*, Geon-Hee Kim*, and Wonkyun Lee*, "Effect of crystal structure on material behavior in ultra-precision diamond turning of polycrystalline Zinc Sulfide," International Journal of Precision Engineering and Manufacturing, Vol. 26, pp. 2819-2835, 202507.

22. Jun-Young Oh and Wonkyun Lee*, "Model-based tool wear detection and life prognostics for end-mill," Journal of Manufacturing Processes, Vol. 133, pp. 1086-1099, 202501.

21. Sung-Jin Choi, Jun-young Oh, Beomsik Sim and Wonkyun Lee*, "Active compliance control of grinding process for stripping enameled copper wire," International Journal of Advanced Manufacturing Technology, Vol. 136, pp. 1671-1680, 202412.

20. Minwoo Jeon, Seok-Kyeong Jeong, Woo-Jong Yeo, Hwan-Jin Choi, Mincheol Kim, Min-Gab Bog, and Wonkyun Lee*, "Performance Enhancement of Material Removal using a Surface-Refinement Model based on Spatial Frequency-Response Characteristics in Magnetorheological Finishing," International Journal of Advanced Manufacturing Technology, Vol. 135, pp. 5391-5408, 202411.

19. Jun-Young Oh, Sung-Jin Choi, Chang-Ju Kim, Segon Heo, and Wonkyun Lee*, "Estimation and compensation of cutting force induced position error in robot machining system," Precision Engineering, Vol. 86, pp. 101-108, 202403.

18. Jong‑Gyun Kang, Seok‑Kyeong Jeong, Minwoo Jeon, Byeongjoon Jeong, Woo‑Jong Yeo, Hwan‑Jin Choi, Yong-Eeun Kwon, Joongkyu Ham, Geon-Hee Kim, and Wonkyun Lee*, "Magnetorheological finishing of electroless nickel-phosphorus-plated mold for ultraprecision injection molding," International Journal of Advanced Manufacturing Technology, Vol. 131, pp. 1705-1716, 202402.

17. Woo-Jong Yeo, Hwan-Jin Choi, Minwoo Jeon, Mincheol Kim, Young-Jae Kim, Byeong Joon Jeong, Seok-Kyeong Jeong, Jong-Gyun Kang, Dong-Ho Lee, Geon-Hee Kim, I Jong Kim*, and Wonkyun Lee*, "Enhancement of optical surface quality based on real-time compensation of temperature-driven thermal errors in diamond turning," Journal of Manufacturing Processes, Vol. 110, pp. 424-433, 202401.

16. Beomsik Sim and Wonkyun Lee*, "Digital twin based machining condition optimization for CNC machining center," International Journal of Precision Engineering and Manufacturing-Smart Technology, Vol. 1, No. 2, pp. 115-123, 202307.

15. Jun Young Oh, Beomsik Sim, Woo Jin Lee, Sung Jin Choi, and Wonkyun Lee*, "Model-based feed rate optimization for cycle time reduction in milling," Journal of Manufacturing Processes, Vol. 94, No. 26, pp. 289-296, 202305.

14. Namhyun Kim, Daejin Oh, Jun-Young Oh, and Wonkyun Lee*, "Disturbance-Observer-Based Dual-Position Feedback Controller for Precision Control of an Industrial Robot Arm," Actuators, Vol. 11, No. 12, pp. 375, 202212.

13. Minwoo Jeon, Seok-Kyeong Jeong, Jong-Gyun Kang, Woo-Jong Yeo, Young-Jae Kim, Hwan-Jin Choi, and Wonkyun Lee*, "Prediction model for edge effects in magnetorheological finishing based on edge tool influence function," International Journal of Precision Engineering and Manufacturing, Vol. 23, pp. 1275-1289, 202210.

12. Jeongyeong Kim, Songho Lee, Jongjik Lee, Yongjin Kim, Dongmin Shin, Wonkyun Lee, and Taehyun Lee*, "A Study on Deep Learning- based Fault Diagnosis and Classification for Marine Engine System Auxiliary Equipment," Processes 2022, Vol. 10, No. 7, pp. 1345, 202207.

11. Dong-Ho Lee, Sunwoo Lee, Woo-Jong Yeo, Seok Kyung Jeong, Minwoo Jeon, Hwan-Jin Choi, Hong-Seung Kim, Ji Yong Bae, Dong Uk Kim, Hwan Hur, Sangwon Hyun, Kye-Sung Lee, Ki Soo Chang, Wonkyun Lee, Soojong Pak, Geon Hee Kim, and I Jong Kim*, "Wavelength-tunable spiral-phase-contrast imaging," Optics Express, Vol. 30, No. 15, pp. 27273-27284, 202207.

10. Dong-Ho Lee, Hong-Seung Kim, Ilkyu Han, Ji Yong Bae, Woo-Jong Yeo, Seok Kyung Jeong, Minwoo Jeon, Hwan-Jin Choi, Dong Uk Kim, Kye-Sung Lee, Ki Soo Chang, Wonkyun Lee, Geon Hee Kim, and I Jong Kim*, "Generation of wavelength-tunable optical vortices using an off-axis spiral phase mirror," Optics Letters, Vol. 46, No. 17, pp. 4216-4219, 202109.

9. Geun Byeong Chae, Ok Hyun Jo, Wontaek Song, and Wonkyun Lee*, "Optimization of cutting fluid supply based on the motor current," Journal of Mechanical Science and Technology, Vol. 35, pp. 1641-1650, 202103.

8. Namhyun Kim, Hyunjung Kim, and Wonkyun Lee*, "Hardware-in-the-loop simulation for estimation of position control performance of machine tool feed drive," Precision engineering, Vol. 60, pp. 587-593, 201911.

7. Wontaek Song, Jaeyoon Shim, Namhyun Kim, Geun Byeong Chae, and Wonkyun Lee*, "Friction Compensation Control of Feed Drive System Operated in Vacuum," Journal of Mechanical Science and Technology, Vol. 33, No. 11, pp. 5353-5360, 201911.

6. Wonkyun Lee, Seong Hyeon Kim, Jaesang Park, and Byung-Kwon Min*, "Simulation-based machining condition optimization for machine tool energy consumption reduction," Journal of Cleaner Production, Vol. 150, pp. 352–360, 201705.

5. Wonkyun Lee, Chan-Young Lee, Young Hun Jeong, and Byung-Kwon Min*, "Friction compensation controller for load varying machine tool feed drive," International Journal of Machine Tools & Manufacture, Vol. 96, pp. 47-54, 201509.

4. Wonkyun Lee, Chan-Young Lee, Young Hun Jeong, and Byung-Kwon Min*, "Distributed component friction model for precision control of a feed drive system," IEEE/ASME Transactions on Mechatronics, Vol. 20, No. 4, pp. 1966-1974, 201508.

3. Segon Heo, Mingyu Lee, Seong Hyeon Kim, Wonkyun Lee, and Byung-Kwon Min*, "Compensation of tool deflection in micromilling using workpiece holder control device," International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 6, pp. 1205-1208, 201506.

2. Wonkyun Lee, Eunseok Nam, Chan-Young Lee, Kyung-In Jang, and Byung-Kwon Min*, "Electrochemical oxidation assisted micromachining of glassy carbon substrate," International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 3, pp. 419-422, 201503.

1. Wonkyun Lee, Chan-Young Lee, and Byung-Kwon Min*, "Simulation-based energy usage profiling of machine tool at the component level," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, pp. 183-189, 201407.


Domestic Journal
(1저자, 교신저자*)

14. 심범식, 박종현, 이원균*, "EtherCAT 기반 공작기계의 모니터링 기술 및 가공성능 향상을 위한 적응제어 기술," 제출.

13. 김재은, 오준영, 심범식, 이원균*, "주축 모터의 전기적 특성을 고려한 절삭력 모니터링," 한국정밀공학회지, Vol. 42, No. 1, pp. 19-25, 202501.

12. 여우종, 최환진, 전민우, 김민철, 김이종, 김건희, 이원균*, "취성 파괴 분석기법을 통한 황화아연 소재의 광학적 특성 분석," 한국정밀공학회지, Vol. 41, No. 2, pp. 95-100, 202402.

11. 이충성, 조유희, 임신열, 류경하, 이원균*, "파일럿 체크 밸브 신뢰성 시험법에 관한 고찰," 한국신뢰성학회 신뢰성응용연구, Vol. 23, No. 4, pp. 383-390, 202312.

10. 최성진, 오준영, 김진서, 이상경, 이원균*, "에나멜 동선 피막 제거를 위한 가공부하 기반 연삭가공공정 적응제어기술," 한국정밀공학회지, Vol. 40, No. 5, pp. 361-366, 202305.

9. 오준영, 이우진, 이원균*, "사이클 타임 단축을 위한 절삭부하 예측 모델 기반 가공속도 최적화," 대한기계학회 논문집 A권, Vol. 47, No. 4, pp. 321-330, 202304.

8. 박대환, 이원균*, "정면절삭 공정에서 페이스커터의 축방향 런아웃이 표면 거칠기에 미치는 영향," 대한기계학회 논문집 A권, Vol. 46, No. 9, pp. 799-804, 202209.

7. 이충성, 강보식, 이원균*, "자연 유입 상태에서의 결로수 예측에 관한 연구," 한국신뢰성학회 신뢰성응용연구, Vol. 21, No. 4, pp. 381-387, 202112.

6. 오대진, 심범식, 이원균*, "자가연상신경망을 이용한 밀링 공정에서의 공구 마모 모니터링," 대한기계학회 논문집 A권, Vol. 45, No. 4, pp. 285-291, 202104.

5. 채근병, 심범식, 김영신, 김후식, 김봉호, 이원균*, "공압 피로 시험기 구성을 위한 공압실린더의 고속/고정밀 제어기술," 한국생산제조학회지, Vol. 29, No. 3, pp. 163-169, 202006.

4. 조옥현, 이강재, 이원균*, "공작기계 디지털 트윈 기반 가공 조건 최적화," 대한기계학회 논문집 A권, Vol. 44, No. 2, pp. 117-125, 202002.

3. 심재윤, 김남현, 오대진, 홍세림, 이원균*, "3D 프린팅 제품의 후처리 가공을 위한 5자유도 로봇 기반 가공시스템 설계 및 가공경로 생성," 대한기계학회 논문집 A권, Vol. 43, No. 5, pp. 359-364, 201905.

2. 이동준, 박재형, 이원균*, 민병권, "가상제조환경에서 제품의 표면 거칠기 전달을 위한 촉각 디스플레이," 한국정밀공학회지, Vol. 33, No. 1, pp. 17-22, 201601.

1. 이원균, 이찬영, 김주영, 송창규, 민병권*, "CNC 제어 이송계의 Hardware-in-the-loop 시뮬레이션," 한국정밀공학회지, Vol. 32, No. 5, pp. 447-454, 201505.